| The
Loglogic Wetland
Harvester is a purpose built low ground
pressure machine for the restoration and harvesting of all types of vegetation
on wetland habitats where its extremely low ground pressure and unique flexible
rubber track ensures minimal damage to both flora and fauna in these environmentally
sensitive areas. The cutting head is a rubber mounted double reciprocating knife
system with overload protection and an automotive traction stop for the occasional
incidence of tree stumps etc. The fully floating suspended head is on large skids
with variable ground pressure. This enables it to both roll, and follow ground
contours and harvest on the most difficult of terrain. The
well proven, precision chopping system is capable of reducing the harvested material
to 10-40mm mean length using an efficient, high speed cutting rotor with 18 tungsten
carbide tipped blades. Due to its unique construction, the cutting rotor is relatively
insensitive to foreign objects such as stones. The blades can be easily sharpened
with the built in sharpening system. The
chopped material is blown into the high tip sealed bulk bin complete with automatic
door. It can then be discharged into a reception vessel.
Features:
- Hydrostatic drive system
with infinitely variable speed control and single joystick control.
- Cutting
head with double reciprocating knife system with stall detect.
- High
tip bulk hopper with automatic door.
- Fully
glazed, rubber mounted, cab with air conditioning, suspension seat, lap restraint
and full instrumentation.
- Escape
hatch in roof of cab.
Technical
Specification: Engine:
- VM HR 494 HT 4 cylinder
cooled turbo diesel
- Engine
Power (DIN 70020) ……………………………………...…….73.5
kW (100 HP)
- Displacement
…………………………………………………..….……2776
L
- Fuel
tank capacity …………………………………………..……....….90
L
Tracks: - Track
Type…………………………………………………….Bridgestone
Rubber Track System
- Track
Width …………………………………………………………….600
mm
- Track
Area……………………………………………………………...4
m2
- Machine
Weight …………………………………………………….....3.7
tonnes
- Ground
Pressure ……………………………………………………..1.5
psi
Transmission: - Hydrostatic
Transmission Pumps…………….…...2 x 21 cc/rev
- Maximum
Pressure ………………………………………………….350
bar
- Tractive
Effort ………………………………………………………....4.0
tonnes
- Machine
speed ………………………………………………………..0
-14 kph.
Cutting
Head: - Double
Reciprocating Knife
- Cutting
Width ………………………………………………………...2250
mm
- Depth
control ……………………………………….………………..-50
mm + 250 mm
- Maximum
roll …………………………………………………………300
mm
- Chopping
System -Throughput Capacity…………………………
10,000kg/hr
- Chop
Length ………………………………………………………....10
- 40 mm*
- Bulk
Payload Bin
- Capacity
…………………………………………………………….…8
m3
|
